The CIRCUITRON CF-1 is a low cost circuit which is designed to slowly flash a Light Emitting Diode, either red or yellow, on and off. The LED provided with the CF-1 is easily mounted under the roof...
The CIRCUITRON FL-2 is designed to be controlled by the output from one of our Grade Crossing Detection circuits. The FL-2 may also be easily wired for continuous flashing or for manual control wit...
The CIRCUITRON DT-1 is a bi-directional detection circuit designed for DC track power that provides an output whenever one of its Opto-Sensors is covered by a piece of rolling stock. Absolutely no ...
The CIRCUITRON DT-3 Single Direction Grade Crossing Detection Circuit utilizes our proven OptoElectronic Detection and will provide accurate grade crossing action for a single locomotive or a 100 c...
The CIRCUITRON AR-1 is a basic automatic polarity reverser that is ideally suited for use with point to point layouts, displays, test tracks or reverse loop setups. The AR-1 utilizes an integrated ...
The CIRCUITRON BD-2 is a very sensitive, integrated circuit design block detector which will work with virtually any scale and type of track power, including most forms of command control. The BD -...
The CIRCUITRON BD-2 is a very sensitive, integrated circuit design block detector which will work with virtually any scale and type of track power, including most forms of command control. The BD -...
The CIRCUITRON TD-1 is designed to connect to the output of any CIRCUITRON Detection Circuit (the DT-4 is the usual choice) and will provide a variable delay period (adjustable from 0 to over 1 min...
The TC-4 is identical in function to the CIRCUITRON TC-2 above, except that the output of the TC-4 is designed to drive the CIRCUITRON TORTOISE? Switch Machine. The TC-4 can also be used with Switc...
Although the outputs on CIRCUITRON Detection Circuits are extremely flexible, they cannot directly control large amounts of current, or AC powered devices. With the addition of an external relay, t...
6 pack of the Circuitron Smail with Terminal Block
Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately).
Compatible with all DCC s...
